Billiards is a popular past-time game that is found in many homes. The material that is most commonly used for making it is slate. It is a good choice because it is resilient and attractive. This is in addition to the fact that it produces durable outcomes. Even though the material is durable, it is bound to experience wear and tear over time. In consideration of billiards repair Denver residents can consider the services of professionals. It is however important to know how to go about general repairs.
Wear and tear of slate can be seen through the presence of cracks within it. There are a number of useful tips for helping to repair the billiard so that it is restored to its attractiveness. The repairs can be best attended to after the felt is separated from the table. This will make it easy to carry out repairs more comprehensively. A socket wrench will be important for this. It is used for removing bolts attaching the rails to the table.
After the rails are removed, the staples which attach the felt to the table are removed. A staple puller is the best tool for this though a screwdriver may also be used. The screwdriver should have a flat head. The staples that have been removed should be put aside carefully so that they are not misplaced. Besides, they are likely to cause injury if stepped upon.
The slate needs inspection to determine the extent to which it has been affected by cracks. Beeswax is used to fill in the cracks and small chips. The wax is held four inches above the crack then it is melted through the use of a small portable torch that uses propane. The wax is left to drip into the crack.
Slate normally requires a lot of wax to bond effectively. After the wax has cooled well, a paint scraper is used to remove any excess wax. The excess wax needs to be removed because it will lead to the slate having an unpleasant appearance. The wax should also be placed carefully and in the right amounts so that it dries up and fills the cracks more effectively.
There is the option of using billiard table wax. This contains resin that hardens in a better way than beeswax and gives more durable results. If the cracks are big, then billiards wax will be the better option. After the application is completed and the excess wax is scraped, the slate is wiped with a damp sponge or cloth. Billiard table wax will also be effective when one has to seal loose seams on the slate.
If however the cracks are very big and extensive, you will need to purchase slate repair glue. It has thick consistency that assists to bond slate in a better way. It is applied within the crack on both sides. After that, the two sides of the slate get pushed together in a firm way.
Because of the pressure of the slate being pushed together, some glue may seep out. The glue should be left to dry up. After that, it is smoothed down using sandpaper. After repairs are complete, the felt is returned to position.
Wear and tear of slate can be seen through the presence of cracks within it. There are a number of useful tips for helping to repair the billiard so that it is restored to its attractiveness. The repairs can be best attended to after the felt is separated from the table. This will make it easy to carry out repairs more comprehensively. A socket wrench will be important for this. It is used for removing bolts attaching the rails to the table.
After the rails are removed, the staples which attach the felt to the table are removed. A staple puller is the best tool for this though a screwdriver may also be used. The screwdriver should have a flat head. The staples that have been removed should be put aside carefully so that they are not misplaced. Besides, they are likely to cause injury if stepped upon.
The slate needs inspection to determine the extent to which it has been affected by cracks. Beeswax is used to fill in the cracks and small chips. The wax is held four inches above the crack then it is melted through the use of a small portable torch that uses propane. The wax is left to drip into the crack.
Slate normally requires a lot of wax to bond effectively. After the wax has cooled well, a paint scraper is used to remove any excess wax. The excess wax needs to be removed because it will lead to the slate having an unpleasant appearance. The wax should also be placed carefully and in the right amounts so that it dries up and fills the cracks more effectively.
There is the option of using billiard table wax. This contains resin that hardens in a better way than beeswax and gives more durable results. If the cracks are big, then billiards wax will be the better option. After the application is completed and the excess wax is scraped, the slate is wiped with a damp sponge or cloth. Billiard table wax will also be effective when one has to seal loose seams on the slate.
If however the cracks are very big and extensive, you will need to purchase slate repair glue. It has thick consistency that assists to bond slate in a better way. It is applied within the crack on both sides. After that, the two sides of the slate get pushed together in a firm way.
Because of the pressure of the slate being pushed together, some glue may seep out. The glue should be left to dry up. After that, it is smoothed down using sandpaper. After repairs are complete, the felt is returned to position.
About the Author:
If you are looking for information about billiards repair Denver residents should pay a visit to our web pages online here today. Additional details are available at http://www.americanbilliardsservice.com now.
No comments:
Post a Comment